SMC Networks TigerAccess SMC7816M Manuel d'utilisateur télécharger pdf (Page 931)

100

101

ASIC

IP C

ONFIGURATION

38-5

ping

This command sends ICMP echo request packets to another node on the

network.

Syntax

ping host [count count][size size]

• host - IP address or IP alias of the host.

• count - Number of packets to send. (Range: 1-16, default: 5)

• size - Number of bytes in a packet. (Range: 32-512, default: 32)

The actual packet size will be eight bytes larger than the size specified

because the router adds header information.

Default Setting

This command has no default for the host.

Command Mode

Normal Exec, Privileged Exec

Command Usage

• Use the ping command to see if another site on the network can be

reached.

• The following are some results of the ping command:

- Normal response - The normal response occurs in one to ten seconds,

depending on network traffic.

- Destination does not respond - If the host does not respond, a “timeout”

appears in ten seconds.

- Destination unreachable - The gateway for this destination indicates

that the destination is unreachable.

- Network or host unreachable - The gateway found no corresponding

entry in the route table.

• Press <Esc> to stop pinging.

1 2 ... 926 927 928 929 930 931 932 933 934 935 936 ... 961 962

Commentaires sur ces manuels

Pas de commentaire

SMC Networks TigerAccess SMC7816M Manuel d'utilisateur Page 931

Commentaires sur ces manuels