SMC Networks TigerAccess SMC7816M Manuel d'utilisateur Page 888

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 962
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 887
M
ULTICAST
F
ILTERING
C
OMMANDS
35-12
Static Multicast Routing Commands
This section describes commands used to configure static multicast
routing on the switch.
ip igmp snooping vlan mrouter
This command statically configures a multicast router port. Use the no
form to remove the configuration.
Syntax
[no] ip igmp snooping vlan vlan-id mrouter interface
vlan-id - VLAN ID (Range: 1-4093)
interface
ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-19)
port-channel channel-id (Range: 1-12)
Default Setting
No static multicast router ports are configured.
Command Mode
Global Configuration
Command Usage
Depending on your network connections, IGMP snooping may not
always be able to locate the IGMP querier. Therefore, if the IGMP
querier is a known multicast router/switch connected over the network
to an interface (port or trunk) on your router, you can manually
configure that interface to join all the current multicast groups.
Table 35-4 Static Multicast Routing Commands
Command Function Mode Page
ip igmp snooping vlan
mrouter
Adds a multicast router port GC 35-12
show ip igmp snooping
mrouter
Shows multicast router ports PE 35-13
Vue de la page 887
1 2 ... 883 884 885 886 887 888 889 890 891 892 893 ... 961 962

Commentaires sur ces manuels

Pas de commentaire