SMC Networks TigerAccess SMC7816M Manuel d'utilisateur télécharger pdf (Page 383)

Click Priority, IP Port Priority. Enter the port number for a network

application in the IP Port Number box and the new CoS value in the Class

of Service box, and then click Apply.

Figure 14-10 IP Port Priority

CLI – The following example globally enables IP Port Priority service on

the switch, maps HTTP traffic (on port 1) to CoS value 0, and then

displays the IP Port Priority settings.

* Mapping specific values for IP Port Priority is implemented as an interface config-

uration command, but any changes will apply to the all interfaces on the switch.

Console(config)#map ip port 33-12

Console(config)#interface ethernet 1/1 25-2

Console(config-if)#map ip port 80 cos 0 33-12

Console(config-if)#end

Console#show map ip port ethernet 1/5 33-17

TCP port mapping status: disabled

Port Port no. COS

--------- -------- ---

Eth 1/ 1 80 0

Pas de commentaire

SMC Networks TigerAccess SMC7816M Manuel d'utilisateur Page 383