SMC Networks TigerAccess SMC7816M Manuel d'utilisateur télécharger pdf (Page 168)

UTHENTICATION

releases. The client responds to the appropriate method with its

credentials, such as a password or certificate. The RADIUS server verifies

the client credentials and responds with an accept or reject packet. If

authentication is successful, the switch allows the client to access the

network. Otherwise, network access is denied and the port remains

The operation of dot1x on the switch requires the following:

• The switch must have an IP address assigned.

• The IP address of the RADIUS server must be specified.

• 802.1X must be enabled globally for the switch.

• Each switch port that will be used must be set to dot1x “Auto” mode.

• Each client that needs to be authenticated must have dot1x client

software installed and properly configured.

• The RADIUS server and 802.1X client support EAP. (The switch only

supports EAPOL in order to pass the EAP packets from the server to

the client.)

Pas de commentaire

SMC Networks TigerAccess SMC7816M Manuel d'utilisateur Page 168