SMC Networks TigerAccess SMC7816M Manuel d'utilisateur Page 653

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 962
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 652
SWITCHPORT
PACKET
-
RATE
25-11
Example
The following example disables port 5.
switchport packet-rate
This command configures broadcast and multicast and unknown unicast
storm control. Use the no form to restore the default setting.
Syntax
switchport {broadcast | multicast | unknown-unicast}
packet-rate rate
no switchport {broadcast | multicast | unknown-unicast}
broadcast - Specifies storm control for broadcast traffic.
multicast - Specifies storm control for multicast traffic.
unknown-unicast - Specifies storm control for unknown unicast
traffic.
rate - Threshold level as a rate; i.e., packets per second.
(Range: 500-262143)
Default Setting
Broadcast Storm Control: Enabled, packet-rate limit: 500 pps
Multicast Storm Control: Enabled, packet-rate limit: 500 pps
Unknown Unicast Storm Control: Enabled, packet-rate limit: 500 pps
Command Mode
Interface Configuration (Ethernet)
Command Usage
When traffic exceeds the threshold specified for broadcast and
multicast or unknown unicast traffic, packets exceeding the threshold
are dropped until the rate falls back down beneath the threshold.
Console(config)#interface ethernet 1/5
Console(config-if)#shutdown
Console(config-if)#
Vue de la page 652
1 2 ... 648 649 650 651 652 653 654 655 656 657 658 ... 961 962

Commentaires sur ces manuels

Pas de commentaire