SMC Networks TigerAccess SMC7816M Manuel d'utilisateur télécharger pdf (Page 864)

100

101

UALITY

ERVICE

OMMANDS

34-2

To create a service policy for a specific category of ingress traffic, follow

these steps:

1. Use the class-map command to designate a class name for a specific

category of traffic, and enter the Class Map configuration mode.

2. Use the match command to select a specify type of traffic based on

an access list, a DSCP or IP Precedence value, or a VLAN.

3. Set an ACL mask to enable filtering for the criteria specified in the

match command.

4. Use the policy-map command to designate a policy name for a

specific manner in which ingress traffic will be handled, and enter the

Policy Map configuration mode.

5. Use the class command to identify the class map, and enter Policy

Map Class configuration mode. A policy map can contain multiple

class statements.

6. Use the set command to modify the QoS value for matching traffic

class, and use the policer command to monitor the average flow and

burst rate, and drop any traffic that exceeds the specified rate, or just

reduce the DSCP service level for traffic exceeding the specified rate.

7. Use the service-policy command to assign a policy map to a specific

interface.

show policy-map Displays the QoS policy maps which define

classification criteria for incoming traffic, and

may include policers for bandwidth

limitations

PE 34-12

show policy-map

interface

Displays the configuration of all classes

configured for all service policies on the

specified interface

PE 34-12

Table 34-1 Quality of Service Commands (Continued)

Command Function Mode Page

1 2 ... 859 860 861 862 863 864 865 866 867 868 869 ... 961 962

Commentaires sur ces manuels

Pas de commentaire

SMC Networks TigerAccess SMC7816M Manuel d'utilisateur Page 864

Commentaires sur ces manuels