SMC Networks SMC6709L2 Manuel d'utilisateur télécharger pdf (Page 20)

NITIAL

ONFIGURATION

2-6

To assign an IP address to the switch, complete the following steps:

1. Navigate from the Main Menu to –

Switch Static Configuration,

Administration Configuration, and then

IP Configuration.

2. Select <Edit>, type in the IP Address, Subnet Mask, and Gateway.

Press <Enter> after each item. Press <Ctrl-A> to return to the action

bar at the bottom of the screen. Select <Save> and press any key to

continue. (The IP addresses shown below are merely examples.)

3. Navigate back to the Main Menu, go to Reboot Switch menu, select

the “Restart” command, and press <Enter>.

TigerSwitch 10/100 : IP Configuration

=====================

IP Address : 10.1.0.4

Subnet Mask : 255.255.255.0

Gateway : 10.1.0.253

actions-> <Edit> <Save> <Quit>

Select the action menu.

Tab=Next Item BackSpace=Previous Item Quit=Previous menu Enter=Select Item

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 149 150

Pas de commentaire

SMC Networks SMC6709L2 Manuel d'utilisateur Page 20