SMC Networks SMC6709L2 Manuel d'utilisateur télécharger pdf (Page 104)

ONSOLE

NTERFACE

4-36

Enabling STP

To configure STP, first enable it using the STP Enable/Disable page.

Console – Click Protocol Related Configuration

STP

STP Enable/

Disable. Enable the STP Protocol, and save your settings.

Displaying Information About the Root Bridge

Use the System Configuration page to display the root bridge settings.

The root bridge of the spanning tree is selected whenever the network is

reconfigured. The root bridge is uniquely identified in the spanning tree by

its priority and MAC address. The maximum age, hello time, and forward

delay currently used by all bridges in the spanning tree are set to those

values configured on the root bridge.

Field Attributes

• Priority – Bridge priority for the root device.

• MAC Address – MAC address of the root device.

• Root Path Cost – The path cost from the root port on this switch to the

root device.

• Root Port – The number of the port on this switch that is closest to the

root. This switch communicates with the root device through this port.

TigerSwitch 10/100 : STP Enabled/Disabled Configuration

=====================

STP :Enabled

actions-> <Edit> <Save> <Quit>

Select the action menu.

Arrow/TAB/BKSPC = Move Item Quit = Previous menuu Enter = Select Itemm

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 149 150

Pas de commentaire

SMC Networks SMC6709L2 Manuel d'utilisateur Page 104