SMC Networks SMC6709L2 Manuel d'utilisateur télécharger pdf (Page 16)

NITIAL

ONFIGURATION

2-2

The switch’s console menu, Web Interface, and SNMP agent allow you to

perform the following management functions:

• Set user name and password

• Set an IP interface for management access (console menu only)

• Configure SNMP parameters

• Enable/disable any Ethernet port

• Set the speed/duplex mode for any port

• Configure up to 255 IEEE 802.1Q VLANs

• Enable GVRP automatic VLAN registration

• Configure IGMP multicast filtering

• Upload and download system firmware via TFTP

• Upload and download switch configuration files via TFTP

• Configure Spanning Tree parameters

• Configure Class of Service (CoS) priority queuing

• Configure up to four static or LACP trunks

• Enable port mirroring

• Prevent broadcast storms by limiting bandwidth for broadcast traffic

• Display system information and statistics

Required Connections

The switch provides an RS-232 serial port that enables a connection to a

PC or terminal for monitoring and configuring the switch. A null-modem

console cable is provided with the switch.

Attach a VT100-compatible terminal, or a PC running a terminal

emulation program to the switch. You can use the console cable provided

with this package, or use a null-modem cable that complies with the wiring

assignments shown in the Installation Guide.

To connect a terminal to the console port, complete the following steps:

1. Connect the console cable to the serial port on a terminal, or a PC

running terminal emulation software, and tighten the captive retaining

screws on the DB-9 connector.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 149 150

Pas de commentaire

SMC Networks SMC6709L2 Manuel d'utilisateur Page 16