SMC Networks SMC2586W-G Manuel d'utilisateur télécharger pdf (Page 46)

with various WLAN network adapters. There are three options available,

including Open System, Shared Key, and Auto.

When WEP is enabled by a security mode, the Key length can be specified to

be 64 Bits or 128 Bits. The Selected key setting specifies the key to be used

as a send-key for encrypting traffic from the local device side to the remote

device side. All 4 WEP keys are used as receive-keys to decrypt traffic from

the remote device side to the local device side.

NOTE: Each field of a WEP key setting is a hexadecimal number from 0-9, A-

F. For example, when the security mode is Static WEP and the key length is

64 Bits, you could set Key 1 to “00012E3ADF”.

MAC-Address-Based Access Control

Fig. 48 MAC-address-based access control settings.

With MAC-Address-Based Access Control, you can specify the wireless

clients (STAs or Bridge Slaves) that are permitted or not permitted to asso-

ciate with the SMC2586W-G. When the table type is set to inclusive, entries

in the table are permitted to associate with the SMC2586W-G. When the

table type is set to exclusive, entries in the table are not permitted to asso-

ciate with the SMC2586W-G.

NOTE: MAC-address-based access control is only available when the

SMC2586W-G is in AP or Bridge Master mode.

To deny wireless clients’ access to the wireless network:

1. Select Enabled from the Functionality drop-down list.

2. Set the Access control type to exclusive.

3. Specify the MAC address of a wireless client to be denied access, and

then click Add.

4. Repeat Step 3 for each other wireless client.

To grant wireless clients’ access to the wireless network:

1. Select Enabled from the Functionality drop-down list.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 95 96

Pas de commentaire

SMC Networks SMC2586W-G Manuel d'utilisateur Page 46