SMC Networks SMC2586W-G Manuel d'utilisateur télécharger pdf (Page 23)

To enable a WDS link:

1. Specify the MAC address of the AP or bridge at the other end of the WDS link.

2. Select the corresponding Enabled check box.

For example, assume you want two SMC2586W-Gs with MAC addresses

00-02-65-01-62-C5 and 00-02-65-01-62-C6 to establish a WDS link

between them. On SMC2586W-G 00-02-65-01-62-C5, set the peer MAC

address of port 1 to 00-02-65-01-62-C6 and on SMC2586W-G 00-02-65-

01-62-C6, set the peer MAC address of port 1 to 00-02-65-01-C5.

3. When you are finished, click Save at the bottom of this page. You will be

brought back to the Status page.

TIP: Plan your wireless network and draw a diagram, so that you know how

the SMC2586W-G is connected to other peer APs or wireless bridges by WDS.

Fig. 11. Sample wireless bridge network topology.

Fig. 12. Network topology containing a loop.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 95 96

Pas de commentaire

SMC Networks SMC2586W-G Manuel d'utilisateur Page 23