SMC Networks SMC2586W-G Manuel d'utilisateur télécharger pdf (Page 21)

The relationships among the operational modes and the wireless link

types are shown in the following table:

Table 1. Operational modes vs. wireless link types.

From the table, a WDS link can be establish between two APs, a BM-BS link

can be established between a Bridge Master and a Bridge Slave, but no

wireless link can be established between a Bridge Slave and an AP.

Select an operational mode and click Save at the bottom of this page, and

then you are brought back to the start page.

Step 2: Configuring TCP/IP Settings

Fig. 8. TCP/IP settings.

Go to the TCP/IP Addressing section to configure IP address settings. The

IP address can be manually set or automatically assigned by a DHCP server

on the LAN (Default: DHCP client enabled). If you are manually setting the

IP address, Subnet mask, and Default gateway settings, set them appropri-

ately, so that they comply with your LAN environment. In addition, you can

specify the Host name and Domain (DNS suffix) of the SMC2586W-G.

When you are finished, click Save at the bottom of this page, and then you

are brought back to the start page.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 95 96

Pas de commentaire

SMC Networks SMC2586W-G Manuel d'utilisateur Page 21