SMC Networks SMC6724L2GLSC Manuel d'utilisateur télécharger pdf (Page 18)

NSTALLING

THE

ODULE

6. Secure the new module: Secure the new module in place by

screwing the attached screws clockwise into the switch’s

chassis. Tighten them enough to secure the module, but not so

tight as to prevent them from being unscrewed by hand.

7. Connect the network cable: Connect fiber cable to the port

on the newly installed module. See “Cable Specifications” on

page 9 in this guide for further information.

8. Power on the switch: Reconnect the previously removed

power sources to the switch. Check the switch's front-panel

LED indicators to ensure that the module is operating correctly.

Refer to the table of LEDs on page 1 for a description of the

LED indications. If the module does not respond, see

“Troubleshooting” on page 7.

More details concerning connection options and network

applications can be found in the TigerSwitch 10/100 User Guide.

Information on the module’s configuration options can be found in

the Management Guide that is included with the base unit.

Slot 2Slot 1

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Pas de commentaire

SMC Networks SMC6724L2GLSC Manuel d'utilisateur Page 18