SMC Networks SMC2804WBR V.2 Manuel d'utilisateur télécharger pdf (Page 83)

Troubleshooting

2. Type ipconfig/release.

3. Then type ipconfig/renew.

D. The 10/100 LED does not light after a connection is made

1. Check that the host computer and the Wireless Barricade™

are both powered on.

2. Be sure the network cable is connected to both devices.

3. Verify that Category 5 cable is used if you are operating at

100 Mbps, and that the length of any cable does not exceed

100 m (328 ft).

4. Check the network card connections.

5. The 10BASE-T/100BASE-TX port, network card, or cable

may be defective.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 93 94

Pas de commentaire

SMC Networks SMC2804WBR V.2 Manuel d'utilisateur Page 83