SMC Networks SMC2804WBR V.2 Manuel d'utilisateur télécharger pdf (Page 31)

ONFIGURING

THE

IRELESS

ARRICADE

™

OUTER

The Wireless Barricade™ g Router can be configured by Internet

Explorer 5.0 or above. Using the web management interface,

you can configure the Wireless Barricade™ and view statistics

to monitor network activity.

Note: Before you attempt to configure your router, if you have

access to the Internet please visit www.smc.com

www.smc-europe.com and download the latest firmware

update to ensure your Wireless Barricade™ is running

the latest firmware.

Before you attempt to log into the web-based Administration,

please verify the following.

1. Your browser is configured properly (see below).

2. Disable any firewall or security software that may be running.

3. Confirm that you have a good link LED where your computer

is plugged into the Wireless Barricade™. If you don’t have

a link light, then try another cable until you get a good link.

Browser Configuration

Confirm your browser is configured for a direct connection to the

Internet using the Ethernet cable that is installed in the computer.

This is configured through the options/preference section of your

browser.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 93 94

Pas de commentaire

SMC Networks SMC2804WBR V.2 Manuel d'utilisateur Page 31