SMC Networks SMC2670W Manuel d'utilisateur télécharger pdf (Page 21)

Section 5 | Configure

The EZ Connect Wireless Ethernet Adapter functions as a trans-

parent device on your network by not requiring an IP address

that is within the same subnet as your network. The steps out-

lined below will guide you through the wireless settings and

TCP/IP configuration.

Note: If you are using a Barricade Wireless Broadband Router

or running a DHCP server with an IP address of

192.168.2.XXX, there should be no configuration

required on the SMC2670W.

5.1 | Configure the Wireless Ethernet Adapter

using Windows-based Utility

1. Log into the SMC2670W using the Windows-based Utility.

(see section 4.1 for more information)

2. When you log into the Windows-based Utility, the “INFO”

page displays.To change your settings click the [SETUP >]

button.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 46 47

Pas de commentaire

SMC Networks SMC2670W Manuel d'utilisateur Page 21