SMC Networks SMC2455W Manuel d'utilisateur télécharger pdf (Page 10)

Section 1 | Getting Started

Site Location

Choose a location for your EZ Connect Turbo Wireless Access

Point. Usually, the best location is at the center of your wireless

coverage area.

Connect the Ethernet cable

The EZ Connect Turbo Wireless Access Point should be connect-

ed to a network switch or hub that is connected to a DHCP serv-

er, or connected to a Barricade Broadband Router. Use a stan-

dard Category 5 UTP Ethernet cable with an RJ-45 connector to

connect the Access Point to one of router, hub, or switch.

Connect the power cable

Connect the power adapter cable to the 5V DC power socket on

the rear panel.

Warning: Use only the power adapter supplied with the

SMC2455W. Using another power adapter will cause

damage to the unit and void the warranty.

Antennas

LED Indicator lights:

•Power

•Wireless Transmit/Receiver

•Ethernet Link/Activity

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 49 50

Pas de commentaire

SMC Networks SMC2455W Manuel d'utilisateur Page 10