SMC Networks SMCRPU14 Manuel d'utilisateur télécharger pdf (Page 27)

2-7

Figure 2-4 Power Receptacle

2. Connect one end of a DC cord to the redundant power receptacle on

the supported switch and the other end to an available receptacle on

the RPU.

3. Repeat steps 1 and 2 for connecting up to four supported switches to

the RPU.

4. Connect one end of the AC cord to the AC receptacle on the RPU,

and the other end to a grounded power outlet.

5. Check the LEDs on the RPU to ensure proper operation. The Link

LEDs for connected switches should light up. If the LEDs indicate

otherwise, see “Troubleshooting” on page A-1 for more information.

100-240V, 50-60Hz 10A

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Pas de commentaire

SMC Networks SMCRPU14 Manuel d'utilisateur Page 27