SMC Networks SMCRPU14 Manuel d'utilisateur télécharger pdf (Page 21)

2-1

CHAPTER 2:

INSTALLING THE

REDUNDANT POWER UNIT

Installation

The RPU may be placed on a desktop or mounted in a rack.

Caution: DO NOT place the RPU on the floor as the case is not

waterproof. It is recommended that this RPU be installed in

a network equipment rack.

Selecting a Site

RPU units can be mounted in a standard 19-inch equipment rack or on a

flat surface. Be sure to follow the guidelines below when choosing a

location.

•The site should:

- be at the center of all the devices you want to link and near a

power outlet.

- be able to maintain its temperature within 0 to 45 °C (32 to

110 °F) and its humidity within 5% to 95%, non-condensing

- provide adequate space (approximately two inches) on all sides for

proper air flow

- be accessible for installing, cabling and maintaining the devices

- allow the status LEDs to be clearly visible

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Pas de commentaire

SMC Networks SMCRPU14 Manuel d'utilisateur Page 21