SMC Networks SMC6608M Manuel d'utilisateur télécharger pdf (Page 67)

Spanning Tree Configuration

The Spanning Tree Protocol (STP) is used to detect and disable

network loops and to provide link back-up. It requires certain

parameter settings. The factory default settings (See Figure 4-6)

should be acceptable in most networks. To change the default

settings, proceed as follows:

Figure 4-7. Spanning Tree Configuration Screen

1. Highlight “Spanning Tree Configuration” in the Main

Menu and press <ENTER>. This will access the configura-

tion screen illustrated above.

2. Highlight “Spanning Tree Algorithm” and press <ENTER>

to use the arrow keys to toggle between enabling and

disabling STP. Press <ENTER> again to confirm the choice.

3. Highlight “Priority” and press <ENTER> to input a priority

value (0 to 65535) for the switch. Press <ENTER> again to

confirm the chosen value.

CONFIGURATION AND MANAGEMENT

4-16

Spanning Tree Configuration

Yes

Priority 32768 Maximum Message Age 20

Hello Time 2 Forward Delay 15

Port Priority Path Cost

1 128 10

2 128 10

3 128 10

4 128 10

5 128 10

6 128 10

7 128 10

8 128 10

Return to Previous Menu Take Effect Immediately

Use cursor keys to choose item. Press <ENTER> to confirm choice.

Press <CTRL><N> to return to the Main Menu

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 112 113

Pas de commentaire

SMC Networks SMC6608M Manuel d'utilisateur Page 67