SMC Networks Cable/DSL SMC7008ABR Manuel d'utilisateur télécharger pdf (Page 19)

7008ABR – Manual

6.2.2 | WAN

Specify the WAN connection type provided by your Internet Service Provider, then click “More

Configuration” to enter detailed configuration parameters for the selected connection type.

• Dynamic IP

The Host Name is optional, but may be required by some ISPs. The default MAC address is

set to the WAN’s physical interface on the Barricade. Use this address when registering for

Internet service, and do not change it unless required by your ISP. If your ISP used the MAC

address of an Ethernet card as an identifier when first setting up your broadband account,

connect only the PC with the registered MAC address to the Barricade and click the “Clone

MAC Address” button. This will replace the current Barricade MAC address with the already

registered Ethernet card MAC address.

If you are unsure of which PC was originally set up by the broadband technician, call your

ISP and request they register a new MAC address for your account. Register using the

default Barricade MAC address.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Pas de commentaire

SMC Networks Cable/DSL SMC7008ABR Manuel d'utilisateur Page 19