SMC Networks SMC2482W Manuel d'utilisateur

SMC2482W

113. Hold down the [Reset] button which is located on the back ofthe device.You may need to use a pin or other pointed objectto hold the button down.4

123.Click the [APPLY] button to complete the reset process.4.The unit will reboot and reset the SMC2482W.Using the Web-based Utility to reset the SMC2

13Section 2 |Understanding Wireless ConnectionsThe EZ Connect Turbo Wireless Bridge is based on the IEEE802.11b Wi-Fi standard,which uses radio transm

Important: Enable wireless security Wired Equivalent Privacy (WEP) to protect your network from unwanted access.For more information,see section 6 for

2.3 | Understanding Wireless Security (WEP)Anyone within range of your wireless network is a potentialsecurity risk.Without wireless security options

16The SMC2482W is a Plug-and-Play device.When you plug thisWireless Bridge into your network,it will automatically get an IPaddress from your DHCP ser

173.2 | Installing the Utility Software1. At the splash screen,click the [Install Utility] option to launch the Installation Wizard.2. Click the [Next

18* It is recommended that you choose the default folder name.4.Click the [Finish] button to complete the installation process.

19Section 4 | Accessing the SMC2482WThe EZ ConnectTMTurbo Wireless Bridge can be configured and managed by using two different utilities.•Windows Util

203. Once you have logged into the Windows Utility,you can:•View link and device information•See the available EZ ConnectTMTurbo Wireless Bridges (SMC

CopyrightInformation furnished by SMC Networks,Inc.(SMC) is believed to be accurate andreliable.However,no responsibility is assumed by SMC for its us

21Note: The SMC2482W is DHCP-enabled by default.If you do not know the IP address that was assigned by your DHCP server,please use the Windows Utility

22Section 5 | ConfigureThe SMC2482W EZ Connect Turbo Wireless Bridge can be con-figured from both the Windows and Web-based utility. Sincethe EZ Conne

233. From this section,you can configure the following settings:• SSID •Channel•AP Name •Operating Mode•Advanced SettingsNote: For more information on

245.2 | Configure the Wireless Bridge using Web-based Utility (Setup Wizard)1. Log into the SMC2482W Web-based Utility.(See section 4.2 for more infor

254. The first step in the Setup Wizard is to configure SSID and wireless channel (default wireless channel is 6).Note: For more information on the di

6. The second step in the Setup Wizard is to configure WEP encryption:Note: If this is your first experience with wireless networking,it is a good ide

275.3 | Configure the Wireless Bridge using Web-based Utility (Advanced Setup)The Advanced Setup option provides more configurationoptions for the SMC

284. When you have completed configuring these settings,click the [APPLY] button to save the settings and reboot the Wireless Bridge.5. To configure w

295.4 | SMC2482W Operating ModesThe EZ Connect Turbo Wireless Bridge has 3 operating modes toprovide a flexible wireless solution for any situation. T

Access PointThe operating mode is configured when you need to add awireless connection to your network or extend the coverage ofan existing wireless n

6.1 | Configure WEP using Windows-based Utility1. Log into the SMC2482W using the Windows-based Utility.(See section 4.1 for more information)2. Click

326.2 | Configure WEP using Web-based Utility1. Log into the SMC2482W Web-based Utility.(See section 4.2 for more information)2. Click on [Advanced Se

336.3 | Configure MAC Filtering using Web-based Utility (Access Point mode)1. Log into the SMC2482W Web-based Utility.(See section 4.2 for more inform

34Section 7 | EZ Connect Turbo Wireless Bridge InformationBoth the Windows Utility and Web-based Utility provide infor-mation about the EZ Connect Tur

357.1 | View Wireless Bridge information using Windows-based Utility1. Log into the SMC2482W using the Windows-based Utility.(See section 4.1 for more

367.2 | View Wireless Bridge information using Web-based Utility1. Log into the SMC2482W using the Web-based Utility.(See section 4.2 for more informa

37Section 8 | Changing the Password on the SMC2482WFor network security,it is a good idea to change the EZConnectTMTurbo Wireless Bridge’s default pas

38Section 9 | Upgrading the SMC2482WThe EZ ConnectTMTurbo Wireless Bridge is upgradeable throughthe Web-based Utility.Please verify that you have the

395. When you have the correct installation path,click the [APPLY] button to begin the upgrade process.6. Click [OK] to the pop-up dialog boxes to beg

40Section 10 | Backing up and Restoring the Wireless BridgeThe EZ ConnectTMTurbo Wireless Bridge offers a configurationbackup and configuration restor

CompliancesFCC Class BFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with thelimits for a C

4110.2 | Restore the SMC2482W configuration from “SMC2482W_backup.bin”file1. Log into the SMC2482W using the Web-based Utility.(See section 4.2 for mo

42Section 11 | Uninstalling the SMC2482W Windows UtilityIf you need to uninstall the EZ Connect Wireless Turbo WirelessBridge Windows Utility program,

Section 12 | Technical SpecificationsData Rate•Up to 22Mbps with Auto Fallback to 11/5.5/2/1 MbpsOperating Range•Up to 350mInterface•RJ-45 – 10/100 Mb

44Section 13 | TroubleshootingThis section provides possible solutions to issues regarding theinstallation and operation of your EZ Connect Turbo Wire

45Section 14 | Glossary802.11 - 802.11 refers to a family of specifications developed bythe IEEE for wireless LAN technology.802.11 specifies the over

46DHCP (Dynamic Host Configuration Protocol) - A protocol forassigning dynamic IP addresses to devices on a network.Withdynamic addressing,a device ca

47is modulated with a narrowband carrier signal that "hops" in arandom but predictable sequence from frequency to frequencyas a function of

48LAN - A local area network (LAN) is a group of computers and asso-ciated devices that share a common communications line andtypically share the reso

49Static IP Address - A permanent IP address that is assigned to anode in a TCP/IP network.Subnet Mask -The method used for splitting IP networks into

50WEP (Wired Equivalent Privacy) - Is a security protocol for wireless local area networks (WLANs) defined in the 802.11bstandard.WINIPCFG - Configura

6Product RegistrationPlease register your EZ Connect Turbo 2.4GHz 11/22 MbpsWireless Bridge online to activate your warranty:Registration website:http

FOR TECHNICAL SUPPORT,CALL:From U.S.A.and Canada (24 hours a day,7 days a week)(800) SMC-4-YOU;(949) 679-8000;Fax:(949) 679-1481From Europe (8:00 AM -

7Congratulations on your purchase of this EZ Connect™ Turbo2.4GHz 11/22 Mbps Auto-Sensing Wireless Bridge.The EZConnect™ Turbo Wireless Bridge support

8Compatibility:•IEEE 802.3,802.3u•IEEE 802.11b•Wi-Fi ComplaintThe EZ ConnectTMTurbo Wireless Bridge package includes thefollowing:•One EZ Connect™ Tur

9Section 1 | Getting StartedSite LocationChoose a location for your EZ Connect Turbo Wireless Bridge.InBridge mode,the best location for the SMC2482W

1.1 | EZ Connect Turbo 11/22 Mbps Wireless Bridge LED IndicatorsThe preceding diagram shows the LED indicator lights on the EZConnect Turbo Wireless B