SMC Networks SMC9432TX Manuel d'utilisateur télécharger pdf (Page 44)

4-4

ESTING

THE

ETWORK

ARD

Setting Up a Responder

1. Run EZStart.

2. Select “Custom” from the EZStart main screen.

3. Select “Two Node.” The “Two-Node Selection” screen appears.

4. Select “Responder.” The “Respond To Test Messages” screen

appears.

The computer is ready to receive and retransmit messages. The

numbers in the “Frames Received” and “Frames Transmitted”

fields will be dynamically updated once the “Initiator” begins the

test.

Note: Repeat this procedure for all computers you wish to set up

as Responders.

Setting Up an Initiator

1. Run EZStart.

2. Select “Custom” from the EZStart main screen.

3. Select “Two Node.”

4. Select “Initiator.” The “Initiate Test Messages” screen appears.

Note: You can configure several Initiators, which can all send

frames to a single Responder.

Running the Test

1. From the “Initiate Test Messages” screen, use one of the

following procedures to select a Responder.

Select “Find Responder” to have EZStart choose the first

Responder it finds. (Skip ahead to Step 2.)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Pas de commentaire

SMC Networks SMC9432TX Manuel d'utilisateur Page 44