SMC Networks SMC9432TX Manuel d'utilisateur télécharger pdf (Page 16)

1-6

INSTALLING THE NETWORK CARD

System Requirements

For your network card

A PC (WOL-enabled for the SMC9432TX/MP and SMC9432FTX)

and BIOS that support the PCI Local Bus Specification (v2.0 or

later), a bus-mastering PCI slot, and the appropriate type of cable:

10 Mbps operation: UTP Category 3, 4, or 5 cable. For the

SMC9432BTX model only, thin coax cable can also be used.

100 Mbps operation: UTP Category 5 cable. For the

SMC9432FTX model only, 62.5/125 µm fiber cable can also be

used.

Refer to the tables in Appendix B.

For EZStart

MS-DOS, PC-DOS, or Windows operating system v3.11 or later.

Installing a Flash ROM

The EtherPower II 10/100 network card has an on-board socket for

an optional Flash ROM for remote booting. For information on

installing Flash ROMs, refer to the instructions that come with the

Flash ROM.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

Pas de commentaire

SMC Networks SMC9432TX Manuel d'utilisateur Page 16