SMC Networks SMC6608M Manuel d'utilisateur télécharger pdf (Page 63)

System Parameter Configuration

1. Highlight “System Configuration” in the Main Menu and

press <ENTER>. This will access the System Configuration

Screen (See below).

Figure 4-5. System Configuration Screen

2. Highlight “System Name” and press <ENTER> to assign a

name to identify the switch if the default entry (see above) is

not suitable. Press <ENTER> again to confirm entry.

3. Highlight “System Location” and press <ENTER> to input

the physical location of the switch. Press <ENTER> again to

confirm entry.

4. Highlight “System Contact” and press <ENTER> to specify

the party to contact in the event of a switch malfunction.

Press <ENTER> again to confirm entry.

5. Highlight “IP Address” and press <ENTER> to assign an IP

address to the switch. Press <ENTER> again to confirm

entry.

CONFIGURATION AND MANAGEMENT

4-12

System Configuration

System Name SMC TigerSwitch 100

System Location MIS

System Contact SMC Technical Support Dept.

192.72.24.31

Default Gateway 192.72.24.202

Subnet Mask 255.255.255.0

IP State BootP When Needed

Send Ping

Return to Previous Menu

Use cursor keys to choose item. Press <ENTER> to confirm choice.

Press <CTRL><N> to return to Main Menu

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 112 113

Pas de commentaire

SMC Networks SMC6608M Manuel d'utilisateur Page 63