SMC Networks Switch SMCGS24 Manuel d'utilisateur télécharger pdf (Page 24)

NSTALLING

THE

WITCH

Note: If an attached device does not support auto-negotiation, the data

rate will be sensed automatically and the communication mode

will default to half duplex.

4. Cascading Switches and Other Network Devices: All the ports on

the switch support automatic MDI/MDI-X configuration for cable

connections. This allows you to use straight-through cable to connect

to other switches or hubs from any port on the switch. No crossover

cables or other device settings are needed. See the “Cable

Specifications” on page 9 of this guide for further information.

Caution: Do not plug a phone jack connector into any RJ-45 port. This

may damage the switch. Instead, use only twisted-pair cables

with RJ-45 connectors that conform with FCC standards.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

Pas de commentaire

SMC Networks Switch SMCGS24 Manuel d'utilisateur Page 24