SMC Networks SMC8624T Manuel d'utilisateur télécharger pdf (Page 48)

AKING

ETWORK

ONNECTIONS

4-2

Connecting to PCs, Servers, Hubs and Switches

1. Attach one end of a twisted-pair cable segment to the device’s RJ-45

connector.

Figure 4-1. Making Twisted-Pair Connections

2. If the device is a PC card and the switch is in the wiring closet, attach

the other end of the cable segment to a modular wall outlet that is

connected to the wiring closet. (See “Wiring Closet Connections” on

the next page.) Otherwise, attach the other end to an available port on

the switch.

3. Make sure each twisted pair cable does not exceed 100 meters (328 ft)

in length.

4. As each connection is made, the Link LED (on the switch)

corresponding to each port will light to indicate that the connection is

valid.

Note: Avoid using flow control on a port connected to a hub unless it is

actually required to solve a problem. Otherwise back pressure

jamming signals may degrade overall performance for the segment.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

Pas de commentaire

SMC Networks SMC8624T Manuel d'utilisateur Page 48