SMC Networks SMC8624/48T Manuel d'utilisateur Page 434

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 556
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 433
C
OMMAND
L
INE
I
NTERFACE
4-189
channel-group
This command adds a port to a trunk. Use the no form to remove a port
from a trunk.
Syntax
channel-group channel-id
no channel-group
channel-id - Trunk index (Range: 1-6)
Default Setting
The current port will be added to this trunk.
Command Mode
Interface Configuration (Ethernet)
Command Usage
When configuring static trunks, the switches must comply with the
Cisco EtherChannel standard.
•Use no channel-group to remove a port group from a trunk.
•Use no interfaces port-channel to remove a trunk from the switch.
Example
The following example creates trunk 1 and then adds port 11.
Console(config)#interface port-channel 1
Console(config-if)#exit
Console(config)#interface ethernet 1/11
Console(config-if)#
Vue de la page 433
1 2 ... 429 430 431 432 433 434 435 436 437 438 439 ... 555 556

Commentaires sur ces manuels

Pas de commentaire