SMC Networks SMC6824M Manuel d'utilisateur Page 529

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 608
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 528
C
OMMAND
L
INE
I
NTERFACE
4-237
switchport native vlan
This command configures the PVID (i.e., default VLAN ID) for a port. Use
the no form to restore the default.
Syntax
switchport native vlan vlan-id
no switchport native vlan
vlan-id - Default VLAN ID for a port. (Range: 1-4093, no leading
zeroes)
Default Setting
VLAN 1
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
If an interface is not a member of VLAN 1 and you assign its PVID to
this VLAN, the interface will automatically be added to VLAN 1 as an
untagged member. For all other VLANs, an interface must first be
configured as an untagged member before you can assign its PVID to
that group.
If acceptable frame types is set to all or switchport mode is set to hybrid,
the PVID will be inserted into all untagged frames entering the ingress
port.
Example
The following example shows how to set the PVID for port 1 to VLAN 3:
Console(config)#interface ethernet 1/1
Console(config-if)#switchport native vlan 3
Console(config-if)#
Vue de la page 528
1 2 ... 524 525 526 527 528 529 530 531 532 533 534 ... 607 608

Commentaires sur ces manuels

Pas de commentaire