SMC Networks SMCGS16-SMART Manuel d'utilisateur télécharger pdf (Page 20)

ONFIGURING

THE

WITCH

ONFIGURING

THE

WITCH

Using the Web Interface

This switch provides an embedded HTTP web agent. Using a web browser

you can configure the switch and view statistics to monitor network

activity. The web agent can be accessed by any computer on the network

using a standard web browser (Internet Explorer 5.5 or above, or Mozilla

Firefox 1.0 or above).

Prior to accessing the switch from a web browser, be sure you have first

performed the following tasks:

1. Configure the switch with a valid IP address, subnet mask, and default

gateway. (Default: 192.168.2.10/255.255.255.0/0.0.0.0)

(See “Initial Configuration” on page 2.)

2. Set a new password using the web interface. (Default: “smcadmin”).

Access to the web interface is controlled by the password.

(See “Configuring the Logon Password” on page 15.)

Note: If, at any point, you cannot remember the switch's IP address,

you can restore the original settings by following the procedure

described in the "Troubleshooting" section.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Pas de commentaire

SMC Networks SMCGS16-SMART Manuel d'utilisateur Page 20