SMC Networks SMC6724L2 Manuel d'utilisateur télécharger pdf (Page 35)

NSTALLING

THE

WITCH

3-3

Mounting

A TigerSwitch 10/100 unit can be mounted in a standard 19-inch

equipment rack or on a desktop or shelf. Mounting instructions for

each type of site follow.

Installing Optional Modules: Before mounting the switch, be

sure you install any optional modules. If you have purchased

optional slide-in 1000BASE-SX media expansion modules, install

these modules now, following the instructions included with the

package.

Rack Mounting

Before rack mounting the switch, pay particular attention to the

following factors:

◆ Temperature: Since the temperature within a rack assembly

may be higher than the ambient room temperature, check that

the rack-environment temperature is within the specified

operating temperature range. (See page C-2.)

◆ Mechanical Loading: Do not place any equipment on top of a

rack-mounted unit

◆ Circuit Overloading: Be sure that the supply circuit to the rack

assembly is not overloaded.

◆ Grounding: Rack-mounted equipment should be properly

grounded. Particular attention should be given to supply

connections other than direct connections to the mains.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

Pas de commentaire

SMC Networks SMC6724L2 Manuel d'utilisateur Page 35