Smc-networks SMC7004ABR V.2 Manuel d'utilisateur télécharger pdf (Page 51)

Configuring the Barricade™ Router

Dynamic IP

The Host Name is optional, but may be required by some ISPs.

The default MAC address is set to the WAN’s physical interface

on the Barricade™ Router. Use this address when registering for

Internet service, and do not change it unless required by your

ISP. If your ISP used the MAC address of an Ethernet card as an

identifier when first setting up your broadband account, only

connect the PC with the registered MAC address to the

Barricade™ Router and click the Clone MAC Address button.

This will replace the current Barricade™ Router MAC address

with the already registered Ethernet card MAC address.

If you are unsure of which PC was originally set up by the

broadband technician, call your ISP and request that they

default MAC address of the Barricade™ Router.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 108 109

Pas de commentaire

Smc-networks SMC7004ABR V.2 Manuel d'utilisateur Page 51