Smc-networks SMC7004ABR V.2 Manuel d'utilisateur télécharger pdf (Page 11)

Hardware Description

•

4 RJ-45 ports for connection to a 10BASE-T/100BASE-TX

Ethernet Local Area Network (LAN). These ports can

auto-negotiate the operating speed to 10/100 Mbps, the mode

to half/full duplex, and the pin signals to MDI/MDI-X

(i.e., allowing these ports to be connected to any network

device with straight-through cable). These ports can be

connected directly to a PC or to a server equipped with an

Ethernet network interface card, or to a networking device

such as an Ethernet hub or switch.

•

One RJ-45 port for connection to a DSL or cable modem

(WAN). This port also auto-negotiates operating speed to

10/100 Mbps, the mode to half/full duplex, and the pin signals

to MDI/MDI-X.

•

One RS-232 serial port to connect to an ISDN Terminal

Adapter (TA) or to a PSTN analog modem.

•

One parallel printer port that can be connected to a printer.

This printer can then be shared by any LAN users.

The following figure shows the components of the Barricade™

Router:

Figure 1. Front and Rear Panels

SMC7004ABR

Reset

Power

WAN

10/100

Link/Act

1234

LAN

1234

12V 1A

WAN

COM

PRINTER

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 108 109

Pas de commentaire

Smc-networks SMC7004ABR V.2 Manuel d'utilisateur Page 11