Smc-networks SMC Barricade g SMC2804WBR Manuel d'utilisateur télécharger pdf (Page 19)

Connect the System

Attach to Your Network Using Radio Signals

Install a wireless network adapter in each computer that will be

connected to the Internet or your local network via radio signals.

SMC currently offers several wireless network cards, including

the

SMC2802W and SMC2835W wireless cards.

Rotate both antennas on the back of the Router to the desired

position. For more effective coverage, position the antennas

around 45 to 90 degrees apart. Try to place the Router in a

position that is located in the center of

your wireless network.

Normally, the higher you place the antenna,

the better the

performance. Ensure that the Router’s location provides optimal

reception throughout your home or office.

Computers equipped with a wireless adapter can communicate

with each other as an independent wireless LAN by configuring

each computer to the same radio channel. However, the Router

can provide access to your wired/wireless LAN or to the Internet

for all wireless workstations. Each wireless PC in this network

infrastructure can talk to any computer in the wireless group via a

radio link, or access other computers or network resources in the

wired LAN infrastructure or over the Internet via the Router.

The wireless infrastructure configuration not only extends the

accessibility of wireless PCs to the wired LAN, but also increases

the effective wireless transmission range for wireless PCs by

retransmitting incoming radio signals through the Router.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 113 114

Pas de commentaire

Smc-networks SMC Barricade g SMC2804WBR Manuel d'utilisateur Page 19