Smc-networks SMC Barricade g SMC2804WBR Manuel d'utilisateur télécharger pdf (Page 107)

Troubleshooting

2. Type ipconfig/release.

3. Then type ipconfig/renew.

D. The 10/100 LED does not light after a connection is made.

1. Check that the host computer and the Router are both

powered on.

2. Be sure the network cable is connected to both devices.

3. Verify that Category 5 cable is used if you are operating at

100 Mbps, and that the length of any cable does not exceed

100 m (328 ft).

4. Check the network card connections.

5. The 10BASE-T/100BASE-TX port, network card, or cable

may be defective.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 113 114

Pas de commentaire

Smc-networks SMC Barricade g SMC2804WBR Manuel d'utilisateur Page 107