Smc-networks Barricade SMC2804WBR38 Manuel d'utilisateur télécharger pdf (Page 32)

Configuring Client TCP/IP

3. the Local Area Connection Properties box, verify the box next

to Internet Protocol (TCP/IP) is checked. Then highlight the

Internet Protocol (TCP/IP), and click the Properties button.

4. Select “Obtain an IP address automatically” to configure your

computer for DHCP. Click the OK button to save this change

and close the Properties window.

5. Click the OK button again to save these new changes.

6. Reboot your PC.

Configuring a Macintosh Computer

You may find that the instructions here do not exactly match your

screen. This is because these steps and screenshots were

created using Mac OS 8.5. Mac OS 7.x and above are all very

similar, but may not be identical to Mac OS 8.5.

1. Pull down the Apple Menu. Click Control Panel and select

TCP/IP.

2. In the TCP/IP

dialog box,

make sure that

Ethernet is

selected in the

Connect Via:

field.

3. Select Using

DHCP Server

in the Configure

field.

4. Close the TCP/IP dialog box.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 81 82

Pas de commentaire

Smc-networks Barricade SMC2804WBR38 Manuel d'utilisateur Page 32