SMC Networks SMCWBR11S-N Manuel d'utilisateur Page 74

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 137
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 73
C
HAPTER
7
| Wireless Configuration
Advanced Settings
– 74 –
ACM — The admission control mode for the access category. When
enabled, clients are blocked from using the access category.
(Default: Disabled)
AckPolicy — By default, all wireless data transmissions require the
sender to wait for an acknowledgement from the receiver. WMM allows
the acknowledgement wait time to be turned off for each Access
Category (AC) 0-3. Although this increases data throughput, it can also
result in a high number of errors when traffic levels are heavy.
(Default: Acknowledge)
MULTICAST-TO-
UNICAST CONVERTER
The Multicast-to-Unicast Converter section on the Wireless Settings
Advanced page allows you to enable multicast traffic conversion.
Converting multicast traffic to unicast before sending to wireless clients
allows a longer DTIM (Data Beacon Rate) interval to be set. A longer DTIM
interval prevents clients in power-save mode having to activate their radios
to receive the multicast data, which saves battery life.
Figure 39: Multicast-to-Unicast Converter
The following items are displayed in this section on this page:
Multicast-to-Unicast — Enables multicast traffic streams to be
converted to unicast traffic before delivery to wireless clients.
(Default: Disabled)
Vue de la page 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 136 137

Commentaires sur ces manuels

Pas de commentaire