SMC Networks SMC8013WG Manuel d'utilisateur télécharger pdf (Page 34)

B.3 | I have another IP Address displayed

If you have another IP address listed, then the PC may not be configured for a DHCP

connection. Please refer to Chapter 4 | Configure your Computer for information.

Once you have confirmed your computer is configured for DHCP, then please follow the steps

below.

1. Open a DOS window as described above.

2. Type “ipconfig /release” (without the quotes)

3. Then type “ipconfig /renew” (without the quotes)

Once you are able to get a valid IP address from the Wireless Cable Modem Gateway, then you

can now access the web-based Administration pages.

If you still are not getting an IP address from the Gateway, please reset the hardware as

outlined in Chapter 2 and follow the steps outlined in this appendix again.

If you still cannot access the Gateway once you have reset it, please contact SMC Technical

Support.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

SMC Networks SMC8013WG Manuel d'utilisateur Page 34