SMC Networks SMC2755W Manuel d'utilisateur télécharger pdf (Page 17)

Windows Installation (98/2000/Me/NT/XP)

1. Insert the CD-ROM that comes with the package into the

CD-ROM drive on your PC, and then enter the following

command: “D:\utility\setup.” Follow the on-screen instructions

to install the utility program.

2. After you finish the installed utility, choose “Programs,” then

“SMC EZ Connect 802.11a,” and select “EZ Connect 802.11a

Configuration Utility,” from the “Start” menu.

3. The program will then detect all the SMC2755W Wireless

Access Point(s) on the network. (Default SMC2755W IP

address is “192.168.1.20”.)

4. If DHCP is turned “ON” (default setting is “Disable,” page 21)

and a DHCP server is located on the network, then the Access

Point will automatically be assigned an IP address when

booted. From the list of detected devices (see the above

screen), select and double-click on the unit you want to

configure.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Pas de commentaire

SMC Networks SMC2755W Manuel d'utilisateur Page 17