SMC Networks SMC8014W-G Manuel d'utilisateur télécharger pdf (Page 41)

3. To complete the Restore process the Gateway will reboot.

Reboot

In the event that the system stops responding correctly or functioning properly, you can

perform a reboot.

To access the Reboot option page, on the Side Navigation bar, click on [Tools] link and then

click on the [Reboot] link.

To reboot the Gateway, follow the steps below:

1. Click the [Apply] button

2. Click [OK] on the confirmation dialog box

3. The Gateway will reboot.

NOTE: The Reboot will be complete when the power LED stops blinking.

Diagnostics

This section can be used to troubleshoot connection and setup issues. You can do the following:

• Trace Route – enter in the IP/Domain Name and click [tracert] to begin the trace from

the Gateway.

• Ping – enter in the IP/Domain Name and click the [ping] button to begin the ping from

the Gateway.

• Send Inspected Traffic to Log Server – enter in the IP Address of your log server and

the amount of time you want to inspect and then click the [Apply] button. The

Gateway will then capture all the data frames seen by the cable modem interface and

send the results to the configured log server.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

SMC Networks SMC8014W-G Manuel d'utilisateur Page 41