SMC Networks L2-Lite Manuel d'utilisateur télécharger pdf (Page 87)

100

101

Simple Network Management Protocol

3-39

Enabling the SNMP Agent

Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).

Command Attributes

SNMP Agent Status – Enables SNMP on the switch.

Web – Click SNMP, Agent Status.

Figure 3-24 Enabling SNMP Agent Status

CLI – The following example enables SNMP on the switch.

Setting Community Access Strings

You may configure up to five community strings authorized for management access

by clients using SNMP v1 and v2c. All community strings used for IP Trap Managers

should be listed in this table. For security reasons, you should consider removing the

default strings.

Command Attributes

• SNMP Community Capability – The switch supports up to five community strings.

• Current – Displays a list of the community strings currently configured.

• Community String – A community string that acts like a password and permits

access to the SNMP protocol.

Default strings: “public” (read-only), “private” (read/write)

Range: 1-32 characters, case sensitive

• Access Mode

- Read-Only – Authorized management stations are only able to retrieve MIB

objects.

- Read/Write – Authorized management stations are able to both retrieve and

modify MIB objects.

Console(config)#snmp-server 4-62

Console(config)#

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 613 614

Commentaires sur ces manuels

Pas de commentaire

SMC Networks L2-Lite Manuel d'utilisateur Page 87

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel SMC Networks L2-Lite