SMC Networks SMC7401BRA Manuel d'utilisateur télécharger pdf (Page 94)

ABLES

B-4

ADSL Cable

Use standard telephone cable to connect the RJ-11 telephone wall outlet to

the RJ-11 ADSL port on the ADSL Router.

Caution: Do NOT plug a phone jack connector into any RJ-45 port. For

Ethernet connections, use only twisted-pair cables with RJ-45

connectors that conform with FCC standards.

Specifications

Wiring Conventions

For ADSL connections, a twisted-pair cable requires one pair of wires. Each

wire is identified by different colors. For example, one wire might be red and

the other, red with white stripes. Also, an RJ-11 connector must be attached to

both ends of the cable.

Each wire pair must be attached to the RJ-11 connectors in a specific

orientation. The following figure illustrates how the pins on the RJ-11

connector are numbered. Be sure to hold the connectors in the same

orientation when attaching the wires to the pins.

Figure B-2. RJ-11 Connector Pin Numbers

Cable Types and Specifications

Cable Type Max. Length Connector

ADSL Standard phone cable 100 m (328 ft) RJ-11

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 108 109

Pas de commentaire

SMC Networks SMC7401BRA Manuel d'utilisateur Page 94