SMC Networks SMC7004WFW Manuel d'utilisateur télécharger pdf (Page 133)

B-1

PPENDIX

ABLES

Ethernet Cable

Specifications

Twisted-pair Cable

Caution: DO-NOT plug a phone jack connector into any RJ-45

port. Use only twisted-pair cables with RJ-45 connectors

that conform with FCC standards.

For 10BASE-T/100BASE-TX connections, a twisted-pair cable

must have two pairs of wires. Each wire pair is identified by two

different colors. For example, one wire might be red and the other,

red with white stripes. Also, an RJ-45 connector must be attached

to both ends of the cable. All RJ-45 ports on the SMC7004FW,

except for the WAN port, support automatic MDI/MDI-X

configuration. This means that you can use straight-through cable

to attach the LAN ports to any network device. However, when

connecting the WAN port to a broadband modem, you will need to

use either straight-through or crossover cable, depending on the

port type used on the modem.

Cable Types and Specifications

Cable Type Max. Length Connector

10BASE-T Cat. 3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45

100BASE-TX Cat. 5 100-ohm UTP 100 m (328 ft) RJ-45

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 145 146

Pas de commentaire

SMC Networks SMC7004WFW Manuel d'utilisateur Page 133