SMC Networks SMC7004VBR V.2 Manuel d'utilisateur télécharger pdf (Page 18)

CONFIGURING THE

BARRICADE

™

After you have configured TCP/IP on a client computer, use

a web browser to configure the Barricade™ Broadband Router.

The Barricade™ can be configured by any Java-supported

browser

including Internet Explorer 4.0 or above, or Netscape

Navigator 4.7

or above. Using the web management interface,

you may configure

the Barricade™ and view statistics to monitor

network activity.

Note:

Before you attempt to configure your router, if you

have access to the Internet please visit www.smc.com

or www.smc-europe.com

and download the latest

firmware update.

Before you attempt to log into the Barricade™'s Web-based

Administration, please verify the following:

1. Your browser is configured properly (see below).

2. Disable any firewall or security software that may be running.

3. Confirm that you have a good "link" LED where your computer

is plugged into the Barricade™. If you don't have a "link" light,

try another cable until you get a good link.

Browser Configuration

Confirm your browser is configured for a direct connection to the

Internet using the Ethernet cable that is installed in the computer.

This is configured through the options/preference section of your

browser.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 60 61

Pas de commentaire

SMC Networks SMC7004VBR V.2 Manuel d'utilisateur Page 18