SMC Networks TigerSwitch Manuel d'utilisateur Page 238

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 518
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 237
C
ONFIGURING
THE
S
WITCH
3-188
CLI – This example shows that Port 11 has been statically configured as a
port attached to a multicast router.
Specifying Static Interfaces for a Multicast Router
Depending on your network connections, IGMP snooping may not always
be able to locate the IGMP querier. Therefore, if the IGMP querier is a
known multicast router/ switch connected over the network to an
interface (port or trunk) on your switch, you can manually configure the
interface (and a specified VLAN) to join all the current multicast groups
supported by the attached router. This can ensure that multicast traffic is
passed to all the appropriate interfaces within the switch.
Command Attributes
Interface – Activates the Port or Trunk scroll down list.
VLAN ID – Selects the VLAN to propagate all multicast traffic
coming from the attached multicast router.
Unit – Stack unit. (Range: 1-8)
Port or Trunk – Specifies the interface attached to a multicast router.
Console#show ip igmp snooping mrouter vlan 1 4-248
VLAN M'cast Router Port Type
---- ------------------ -------
1 Eth 1/11 Static
Console#
Vue de la page 237
1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 517 518

Commentaires sur ces manuels

Pas de commentaire