Smc-networks SpacePC 1232 Series Manuel d'utilisateur Page 69

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 87
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 68
69
69
Watchdog time-out pin
For external control purposes, the status of the watchdog time-out event is provided to connector
J11 pin 9. This signal goes high when the watchdog resets the system. The software can reset
this signal by setting and resetting bit 2 of the I/O port 110h. This signal is also initialized by
hardware at power-on.
The following example shows how to reset the watchdog time-out pin:
MOV DX, 110h ; Control Port
IN AL, DX ; Read actual value
OR AL, 04h ; Mask reserved bits and set bit 2
OUT DX, AL ; Write new value
AND AL, FBh ;
Mask reserved bits and reset bit 2
OUT DX, AL ; Write new value
Vue de la page 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 86 87

Commentaires sur ces manuels

Pas de commentaire