Smc-networks SMCD3GN Manuel d'utilisateur télécharger pdf (Page 23)

Configuring Your Computer for TCP/IP

Configuring an Apple

Macintosh

Computer

The following procedure describes how to configure TCP/IP on an Apple Macintosh running

Mac OS 10.2. If your Apple Macintosh is running Mac OS 7.x or later, the steps you perform

and the screens you see may differ slightly from the following. However, you should still be

able to use this procedure as a guide to configuring your Apple Macintosh for TCP/IP.

1. Pull down the Apple Menu, click System Preferences, and select Network.

2. Verify that NIC connected to the SMCD3GN is selected in the Show field.

3. In the Configure field on the TCP/IP tab, select Using DHCP (see Figure 10).

4. Click Apply Now to apply your settings and close the TCP/IP dialog box.

Figure 10. Selecting Using DHCP in the Configure Field

SMCD3GN Wireless Cable Modem Gateway User Manual

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Pas de commentaire

Smc-networks SMCD3GN Manuel d'utilisateur Page 23