Smc-networks SMC7008ABR Manuel d'utilisateur télécharger pdf (Page 36)

4. From the list of manufacturers

and printers in the next window,

select the printer you have

attached to the Barricade.

5. Select the SMC Barricade

Print Server Monitor (the

default port name is “SMC

100”) and click “Congure Port”

6. Enter the Barricade’s IP

address in the “IP address”

eld (default is 192.168.2.1)

and click “OK.”

7. You will be asked if you want

to print a test page. Click “Yes”

to make sure that your printer

is congured correctly.

8. Your printer will now appear

in the “Printers” window. Your

computer is congured to print

via the Barricade Print Server.

Repeat these steps on each

computer connected to the

Barricade.

Congure the Network Printer in Unix Systems

Follow the traditional conguration procedure on Unix platforms to set

up the Barricade print server. The printer name is “lpt1.”

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 45 46

Pas de commentaire

Smc-networks SMC7008ABR Manuel d'utilisateur Page 36