Smc-networks SMC2555W-AG Manuel d'utilisateur télécharger pdf (Page 83)

Advanced Configuration

5-27

Administration

Changing the Password

Management access to the web and CLI interface on the

SMC2555W-AG is controlled through a single user name and

password. You can also gain additional access security by using

control filters. (See “Filter Control” on page 5-19.)

To protect access to the management interface, you need to

configure an Administrator’s user name and password as soon as

possible. If the user name and password are not configured, then

anyone having access to the access point may be able to

compromise access point and network security.

Note: Pressing the Reset button on the back of the SMC2555W-AG for

more than five seconds resets the user name and password to the

factory defaults. For this reason, we recommend that you protect

the access point from physical access by unauthorized persons.

Username – The name of the user. The default name is “admin.”

(Length: 3-16 characters, case sensitive.)

New Password – The password for management access.

(Length: 3-16 characters, case sensitive)

Confirm New Password – Enter the password again for

verification.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 255 256

Pas de commentaire

Smc-networks SMC2555W-AG Manuel d'utilisateur Page 83