Smc-networks SMC2552W-G2-17 Manuel d'utilisateur télécharger pdf (Page 276)

Console Port Pin Assignments

B-3

Crossover Wiring

Because the 10/100 Mbps port on the access point uses an MDI pin configuration,

you must use “crossover” cable for network connections to PCs, servers or other

end nodes that only have MDI ports. However, if the device to which you are

connecting supports auto-MDIX operation, you can use either “straight-through” or

“crossover” cable.

Console Port Pin Assignments

The DB-9 console port on the front panel of the access point is used to connect to

the access point for out-of-band console configuration. The command-line

configuration program can be accessed from a terminal, or a PC running a terminal

emulation program. The pin assignments and cable wiring used to connect to the

console port are provided in the following table.

White/Orange Stripe

Orange

White/Green Stripe

EIA

TIA 568B RJ-45 Wiring

tandard

10/100BASE-TX Crossover Cable

End A

End B

Green

Blue

White/Blue Stripe

Brown

White/Brown Stripe

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 295 296

Pas de commentaire

Smc-networks SMC2552W-G2-17 Manuel d'utilisateur Page 276